bkadvgxvcovs.jpg - 21586 Bytes
Advances in Grinding and Abrasive Technology XV
Edited by Bo Zhao, Xipeng Xu, Guangui Cai and Renke Kang
Selected, peer reviewed papers from the 15th biennial conference
Trans Tech Publications 2008 633 pages
(ISBN: 0-87849-313-1)
Price: USD: $276
US price may change due to exchange rates.
Order online
Papers available separately.
CONTENTS

  • The Effect of the Magnetic Fieldís Direction to Polishing in a Magnetic-Electrochemical Compound Polishing
            Li Min Shi, Yong Jiang Niu, Er Liang Liu, Yong Feng Ma . . .1
  • Belt Grinding of TC4 Based on the Technology of Cryogenic Mist Jet Combined MQL
            Yu Fu Wang, Yun Huang, Zhi Huang, Liang Yi . . .8
  • Experimental Study on Point Grinding Technical Parameters Affecting Coolant Jet Parameters
            Shi Chao Xiu, Zhi Jie Geng, Peng Bo Xiu . . .13
  • Experimental Study on Ultra-Precision ELID Grinding for Concave Spherical Surface of Carbide
            Fu Qiang Tong, Yong Zhang, Fei Hu Zhang . . .18
  • Studies on the Grinding Properties of Ultrasonic Assisted Creep Feed Grinding Using Grinding Wheel with Small Diameter
            Jian Xin Zheng, Jia Wen Xu, Chuan Shao Liu . . .23
  • Temperature Field during CMP GaAs Wafer Using an AID
            Wen Zhuang Lu, Dun Wen Zuo, Yu Li Sun, Yu Fei Zhao, Feng Xu, Rong Fa Chen . . .28
  • Design and Research of Embedded Internal Grinding NC System Based on ĶC/OS-II
            Ou Xie, Hua Li, Yan Li . . .34
  • Experimental Study on High Efficiency Grinding Technology for Irregular Surface of Q.L. Red Granite
            Zheng Mei Zhang, Jin Sheng Zhang, Zhi Wang, Chun Ying Zheng . . .40
  • Fatigue Life Variance Prediction Incorporating Residual Stress Scatter Induced by Super-Finishing Grinding Process
            Guang Hui Lu, Xue Ping Zhang, Er Wei Gao . . .45
  • Analysis of Grinding Force Influence on HIPSN Ceramic Grinding Surface
            Ke Zhang, He Wang, Yu Hou Wu, Song Hua Li . . .51
  • Study on the Rheological Effect Models of Fluid Magnetic Abrasive
            Huan Wu Sun, Shi Chun Yang . . .54
  • Study on Precision Measuring Method of Reloading Machine Tool
            Wang Shen Hao, Jie Han, Wei Hao, Bo Zhao . . .61
  • Study on Subsurface Damage Model of the Ground Monocrystallinge Silicon Wafers
            Yin Xia Zhang, Jian Xiu Su, Wei Gao, Ren Ke Kang . . .66
  • Error Separation and Correction Technology of Precision Measuring System in Aspheric Fine Grinding Phase
            Zhen Zhong Wang, Yin Biao Guo, Jiang Guo, Qiao Xu . . .72
  • Research on Wheel Wear in HIPSN Bearing Ring High Speed Grinding
            He Wang, Yu Hou Wu, Ke Zhang, Song Hua Li . . .77
  • Research on Technology of Pulse Electrochemical and its Compound Finishing
            Hong You Li, Yin Biao Guo, Xiao Mei Liu, Jin Jin Zhou . . .82
  • Simulation of Compacting Process for Semi-Fixed Abrasive Wheel
            Bing Hai Lv, Ju Long Yuan, Zhi Wei Wang . . .87
  • Research on NC Grinding Accessories of Isometric Polygonal Profile
            De Sheng Wang, Ai Ping Zhou, Yong Jun Zhao . . .93
  • A Method for Calculating the Maximal Temperature of Single Grain though Analyzing the Grinding Temperature Signal
            Fang Yi You, Jian Yun Shen, Xi Peng Xu . . .98
  • Semi-Fixed Abrasive Machining for Plane Aluminium
            Ju Long Yuan, Jia Jie Chen, Zhi Wei Wang, Dong Qiang Yu . . .103
  • Research on the CAD/CAM Integrated Technique of Superhard Grinding Tools Based on PDM
            Nan Bo Liu, Hong Bin Niu, Zhong Ming Cui . . .108
  • Research on Uniform Surface Roughness in Grinding of Revolving Curved Surface
            Ling Ye Kong, Qiu Sheng Yan, Jun Hui Song, Ya Nan Song . . .113
  • Nano-Precision Finishing Technology Based on Magnetorheological Finishing
            Yao Ming Li, Xing Quan Shen, Ai Ling Wang . . .118
  • Study on the Dynamic Characteristics of Ultrahigh Speed Grinding Spindle Based on Squeeze Film Damping Technology
            Tian Biao Yu, Ya Dong Gong, Hu Li, Wan Shan Wang . . .123
  • Dynamics Model Research of Centrifugal Barrel Surface Finishing Based on 3D Discrete Element Method
            Chun Hua Song, Shi Chun Yang . . .127
  • Research on Surface Roughness of Ultrasonic Polishing without Abrasive Based on Orthogonal Experiments
            Jian Jun Jiang, Jian Xin Zheng, Chuan Shao Liu . . .133
  • Research on the Correlation between the Surface Quality and the Abrasive Grains Wear in Dual-Lapping Process of Sapphire
            Ke Hua Zhang, Dong Hui Wen, Ju Long Yuan . . .137
  • Study on the Properties of New Ultrasonic Vibration Internal Grinding System
            Hua Li, Zhen Yin, Zheng Li . . .142
  • The Key Technologies of Belt Grinding of Glass Fiber Reinforced Plastic Composite
            Li Na Si, Yun Huang, Zhi Huang, Yu Fu Wang . . .149
  • The Modeling and Simulation of Pneumatic Loading System of Double-Sided Polishing Machine
            Tong Xing, Hai Hui Zheng, Wei Li . . .154
  • Design of Ultrasonic Transformer Vibrated Radically with Double Supports in Gear Honing
            Lin Ma, Shi Ying Wang, Ming Lv, Gang Ya . . .159
  • Electroplating Nickel-Iron Alloy on the Diamond Surface
            Li Rong Tan, Yan Hui Wang, Jian Bing Zang, Jin Hui Zhang . . .164
  • Study on Roundness Error Correction for the Ceramic Ball in Rotated Dual-Plates Lapping Process
            Zhao Zhong Zhou, Ju Long Yuan, Bing Hai Lv, Jia Jin Zheng . . .168
  • Research on the Mechanism and the Superficial Microstructure of the Nano-Composited Ceramics under Ultrasonic Polishing
            Ming Zhang, Bo Zhao, Feng Jiao, Yu Li . . .173
  • Processing Experiment Research of the Swirling Airflow Finishing
            Xiu Hong Li, Shi Chun Yang, Sheng Qiang Yang, Yong Ning Gao . . .178
  • Experimental Investigation of Tool Wear in Rotary Ultrasonic Machining of Alumina
            Wei Ming Zeng, Xi Peng Xu, Zhi Jian Pei . . .182
  • Research of Surface Roughness of Fluid Piston Rod Based on the Abrasive Belt Grinding
            Zhi Ming Lv, Yun Huang, Zhi Huang, Li Na Si . . .187
  • Research on the Abrasive Machining of Face Gear
            Yong Xiang Li, Xiao Qin Bi, Jun Shun Zhang, Guo Ding Chen, Ning Zhao . . .192
  • Wear of Brazed Diamond Wheel in Grinding of Cemented Carbide
            You Ji Zhan, Yuan Li, Hui Huang, Xi Peng Xu . . .198
  • Simulation on the Indentation of Large Grain in the Semi-Fixed Abrasive Plate with Discrete Element Method
            Ju Long Yuan, Ke Feng Tang, Zhi Wei Wang, Tao Hong . . .205
  • Finite Element Simulation of Chip Formation with Single Grain
            Wan Shan Wang, Chong Su, Zi Rui Pang, Jun Ming Hou . . .210
  • Modeling of Virtual Grinding Wheel and its Grinding Simulation
            Wan Shan Wang, Chong Su, Tian Biao Yu, Li Da Zhu . . .216
  • Influence of Diamond Abrasive Processing Path to Brittle-Hard Material Surface Generation
            Shan Shan Hu, Cheng Yong Wang, Cheng Gang Chen, Ying Ning Hu, Pei Xing Qin . . .223
  • Design of Simultaneous Ultrasonic Effects in Grinding and Electrofinishing on Taper Hole
            Pai Shan Pa . . .228
  • Dressing Technology on the Diamond Abrasive Grinding Wheels Using the Rotary Diamond Dresser
            Zhong Ming Cui, Peng Hui Deng, Lei Du . . .234
  • Analyzing the Familiar Failures and its Elimination of Hydraulic System which Affect the Processing Precision Grinding Machine
            Yong Tian, Xian Zhou Cao . . .238
  • Drilling Force of SiC Particle Reinforced Aluminum-Matrix Composites with Ultrasonic Vibration
            Xing Xin Xu, Ya Lin Mo, Chuan Shao Liu, Bo Zhao . . .243
  • Research and Development of LM Neural Network Prediction System for Grind-Hardening
            Zhong Feng Pan, Gui Cheng Wang, Chong Lue Hua, Hong Jie Pei . . .248
  • Finite Element Prediction of Grind-Hardening Layer Thickness
            Gui Cheng Wang, Zhong Feng Pan, Jin Yu Zhang, Chong Lue Hua, Ju Dong Liu . . .253
  • Modeling and Studying of Grinding Process Based on Autocad
            Heng Hua Zhao, Chong Su . . .259
  • Effect of Ti Addition on Shear Strength of Brazing Diamond and Ag Based Filler Alloy
            Yan Chen, Hong Jun Xu, Yu Can Fu, Hong Hua Su . . .264
  • Grinding Force and Surface Integrity on Dry Belt Grinding of TA15 Titanium Alloys
            Wen Guo Huo, Jiu Hua Xu, Yu Can Fu . . .269
  • The Effect of a Rotating Heat Pipe in a Brazed Diamond Grinding Wheel on Grinding Temperature
            Ke Ma, Hong Jun Xu, Yu Can Fu . . .274
  • Porous Metal Bond Matrix with High Porosity and Large Pore Size Fabricated Using Pore-Forming Agent
            Hong Hua Su, Yu Can Fu, Jiu Hua Xu, Wen Feng Ding, Hong Jun Xu . . .279
  • Effect of Ultrasonic on Grain Density of Electroplated Diamond Tools
            Ai Bing Yu, Xiu Zhi Wang, Zhao Li, Xin Li Tian . . .284
  • Study on Compliant Control by Cutter Radius Compensating for Rotating Curved Surfaces Polishing on NC Lathes
            Ming Ming Wu, Jian Ming Zhan, Jian Bo Zhang . . .289
  • Motion Analysis of Ball Grinder with Dual-Rotating Plates Lapping Mode
            Yang Fu Jin, Xun Lv, Xiao Dong Hu, Wei Li . . .295
  • Power Spectral Density and Cross Correlation Function Analysis of Finished Surface by Abrasive Jet with Grinding Wheel as Restraint
            Chang He Li, Ya Li Hou, Yu Cheng Ding, Bing Heng Lu . . . p300
  • Investigation of Subsurface Damage Depth of Single Crystal Silicon in Electroplated Wire Saw Slicing
            Yu Fei Gao, Pei Qi Ge, Shao Jie Li . . .306
  • Study on Electroplated Diamond Wire Saw Development and Wire Saw Wear Analysis
            Pei Qi Ge, Yu Fei Gao, Shao Jie Li, Zhi Jian Hou . . .311
  • A Technological Study on Granite Grinding
            Zeng Wen Liu, Chuan Zhen Huang . . .316
  • Development of Resin Bonded Diamond Wire Saw and Slicing Experiments
            Pei Qi Ge, Zhi Jian Hou, Shao Jie Li . . .321
  • NC Programming and Error Discussion in Grinding for Cylindrical Camís Groove
            Zi Qiang Zhang, Shang Lin Wen, Shao Bo Chen, Zhi Dan Zheng . . .327
  • Theoretic Analysis and Simulation on Horizontal Spindle Barrel Finishing
            Wen Hui Li, Sheng Qiang Yang, Shi Chun Yang, Hong Ling Chen . . .332
  • Experimental and Mechanism Research on EDM Combined with Magnetic Field
            Ming Rang Cao, Yan Qing Wang, Sheng Qiang Yang, Weng Hui Li . . .337
  • Simulation of Equipment Parameters on Gas-Particle Two-Phase Swirling Flows Finishing
            Sheng Qiang Yang, Wen Hui Li, Shi Chun Yang . . .342
  • A Methodology for the Simulation of Surface-Contact Grinding Tool Topography
            Dong Xiang Chen, Qiang Feng . . .348
  • An Analyzing on Material Removal Mechanism in Chemical Mechanical Polishing of Cu
            Jian Xiu Su, Yin Xia Zhang, Xi Qu Chen, Bin Feng Yang, Dong Ming Guo . . .354
  • Research on Adaptive Control of Grinding Force of CNC Cams Grinder
            Zhan Qi Hu, Ming Li Xie, Yu Kun Li, Yi Tong Zhang . . .360
  • The Design and Manufacture of Quick-Point Grinding Wheel
            Jian Qiu, Ya Dong Gong, Yue Ming Liu, Yan Cheng Zhang . . .365
  • The Grinding Mechanism on Quick-Point Grinding Wheel Wear and Effects on Surface Quality
            Ya Dong Gong, Jian Qiu, Yu Jiao Liu, Jun Cheng, Fan Xu . . .370
  • The Development of Cutter Location Algorithm for the 6-Axis Simultaneous CNC Abrasive Belt Grinding Complex Surface
            Zhi Huang, Yun Huang, Wei Wen Zhang, Yue Yu Wu . . .375
  • Study of Inhibition Function of Grinding Fluid Additive to Leaching Cobalt from Cemented Carbide
            Hao Qiang Zhang, Xiao Ming Jia, Fei Wang . . .381
  • Study on Performance of Hot Pressed High Phosphorus-Boron Iron-Based Bit Matrix and Diamond Bit
            Zhan Yang, Bing Suo Pan, Kai Hua Yang . . .386
  • Study of Magnetic Finishing for an Internal Surface Using a Permanent Magnetic Pole
            Xin Gai Yao, Yan Hong Ding . . .391
  • Experimental Research on Laser Brazing of Diamond Grits with a Ni-Based Filler Alloy
            Zhi Bo Yang, Ai Ju Liu, Jiu Hua Xu . . .396
  • Clustering Regression Modeling for Gear Hobbing Machine Thermal Error Compensation
            Qian Jian Guo, Xiao Ni Qi . . .401
  • Study of Finishing Mechanism for Internal Surface Using Magnetic Force Generated by Rotating Magnetic Field
            Xin Gai Yao, Yan Hong Ding, Gang Ya, Wei Wei Liu, Yuan Zhang . . .406
  • Theoretical Research and Verification on the Porosity of Semi-Fixed Abrasive Tool
            Dong Hui Wen, Xun Lv, Ju Long Yuan . . .411
  • Research on the Basic Properties of the Bamboo Charcoal Bonded Grinding Wheel
            Wei Li, Zhi Yang Song, Tian Ming Yu, Bao Gong Geng . . .416
  • The Development of Large High Efficient CNC Gantry Grinder for Vessel Head in Nuclear Power
            Yun Huang, Zhi Huang, Wei Wen Zhang, Li Ping Wang . . .421
  • The Honing Technical Research of the Difficult-to-Cut Materials
            Hai Peng, Ze Fu Bao . . .426
  • The Process Parameters Optimization Study of Nuclear Power High-Pressure Vessel Belt Grinding Base on ANN
            Ying Liu, Zhi Huang, Yun Huang . . .432
  • Comparison of Processing Features between Semi Bonded Abrasive Lapping and Loose Abrasive Lapping
            Xun Lv, Ju Long Yuan, Dong Hui Wen . . .439
  • Structural Transformation of High Vanadium High Speed Steel during Tempering and its Influence on Abrasive Wear Performance of the Material
            Hui Min Chen, Liu Jie Xu, Shi Zhong Wei . . .443
  • Research on the Performance of the Copper Based Diamond Saw
            Xiao Qin Bi, Jian Ye Zhu, Jie Wang . . .449
  • An Investigation into the Effecting Mechanism of Alloying Additives on the Bronze Matrix and Diamond Composites
            Qiu Lian Dai, Can Bin Luo, Yu Rong Lv . . .455
  • Experimental Research on Deep Hole Honing of Difficult-to-Cut Materials Based on Mixture-Abrasive Honing Stones
            Lin Zhu, Hai Peng, De Ming Xiao . . .461
  • Research and Development of Ultrasonic Honing Vibration CAE System on UG
            Xi Jing Zhu, Zhi Meng Lu, Quan Chen, Jian Qing Wang . . .467
  • Experimental Study on the Influence of the Grinding Wheel Topography on Grinding Chatter and Grinding Surface Waveness
            Ze Yu Weng, Bo Lu, Hong Wu You, Hong Gang Ding, Yong Cai, Guang Chen Xu, Nan Nan Zhang . . .472
  • Brittle-Ductile Transition in the Two-Dimensional Ultrasonic Vibration Grinding of Nanocomposite Ceramics
            Yan Wu, Bo Zhao, Xun Sheng Zhu . . .477
  • Grinding of Nanostructured WC Coatings with Single Fibrous-Abrasive Wheel
            Gao Feng Zhang, Bi Zhang, Zhao Hui Deng, Yuan Qiang Tan . . .482
  • Research on the Material Removal Mechanism in Deliquescent Polishing of KDP Crystals
            Fei Hu Zhang, Shao Long Guo, Yong Zhang, Dian Rong Luan . . .487
  • Study on Ultrasonic Grinding Method and Mechanism of the Engineering Ceramic Material
            Hua Li Su, Jun Liu, Quan Fang Gai . . .492
  • Research on a Colloid Jet Polishing Equipment and its NC Interpolation Algorithm for Rotary Symmetric Aspheric
            Yong Zhang, Qing Quan Zhang, Xiao Zong Song, Guang Yu Zhang, Fei Hu Zhang . . .497
  • Grinding Forces and Grinding Energy in High Speed Grinding for Quenched Steel
            Bao Fu Feng, Hua Li Su, Quan Zhong Zhang, Lei Zheng, Quan Fang Gai, Guang Qi Cai . . .504
  • Analysis on Centerless Grinding of Titanium Alloy
            Wei Wei Ming, Qing Long An, Ming Chen . . .509
  • Experimental and Numerical Study on Grinding Temperature during Surface Grinding with Different Cooling Methods
            Qing Long An, Yu Can Fu, Jiu Hua Xu . . .514
  • A Methodology for the Simulation of Surface-Contact Grinding Tool Topography
            Guo Zhi Zhang, Xian Hua Zhang, Li Li Liu, Zeng Ju Wei . . .519
  • Research on Grinding Model of Roller for Manufacturing Involute Spline
            Feng Shou Zhang, Feng Kui Cui, Chun Mei Li, Xiao Qiang Wang . . .524
  • Study on Grinding Performance of Soft Abrasive Wheel for Silicon Wafer
            Ren Ke Kang, Shang Gao, Zhu Ji Jin, Dong Ming Guo . . .529
  • Analysis of Influence Factors for White Layer in Grinding of Harden Steel
            Xiang Ming Huang, Zhi Xiong Zhou, Yang Jun, Qi Long Xia . . .535
  • Experimental Temperature Studies on Two Dimensional Ultrasonic Vibration Grinding the Nano-ZrO2 Ceramics
            Ping Yan Bian, Bo Zhao, Yu Li . . .540
  • NC Polishing of a Press Roll with an Arc Surface of an Ultra-Large Radius
            Ying Liang Yu, De Qing Yang . . .546
  • Research on Preparation and Properties of Magnetic Abrasive by Conventional Solid-State Method
            Zeng Dian Zhao, Yu Hong Huang, Yu Gang Zhao, Xian Jin Yu . . .553
  • On the Evaluation of Lapping Uniformity for Precision Balls
            Zhi Wei Wang, Bing Hai Lv, Ju Long Yuan, Fan Yang . . .558
  • An Investigation to Semi-Fixed Abrasives Plate Characteristics
            Qian Fa Deng, Ju Long Yuan, Zhi Wei Wang, Dong Hui Wen, Xun Lv . . .563
  • The Establishment of Orthogonal Cutting Finite Element Model and its Key Technologies
            You Yi Zheng, Ai Hua Gao . . .568
  • Online Wear Evaluation of Grinding Wheel in Machining WC-Co Coating
            Ke Wan Jiang, Qi Wu, De Jin Hu . . .572
  • Experimental Study on the Dressing Force of Super-Abrasive Grinding Wheel with Elliptic Ultrasonic Vibration
            Bo Zhao, Guo Fu Gao, Qing Hua Kong . . .578
  • Magnetorheological Flexible Gasbag Polishing Technique
            Shi Ming Ji, Ming Sheng Jin, Li Zhang, Qiao Ling Yuan, Xian Zhang, Guo Da Chen . . .583
  • Study on the Phase Transition Characteristics in Ultrasonic High Efficiency Lapped Surface of Engineering Ceramics
            Feng Jiao, Bo Zhao, Yong Zhao, Tai Ping Li . . .588
  • Comparisons of Surface Roughness for Precision Ground Different Brittle Materials
            Jian Yun Shen, Xi Peng Xu . . .593
  • Machining Performance on Multi-Layer Brazed Diamond Tools
            Bing Xiao, Hong Jun Xu, Hong Hua Su, Yu Can Fu, Jiu Hua Xu . . .598
  • Detection and Recognition of Steel Ball Surface Defect Based on MATLAB
            Yong Zhi Lin, Xian Li Liu, Hai Ying Han, Yi Wen Wang, Peng Wang . . .603
  • High Efficient Mechanism of Material Removal in Two-Dimensional Ultrasonic Grinding from the Locus Perspective
            Ming Li Zhao, Bo Zhao, Yu Qing Wang, Guo Fu Gao . . .609
  • Research on Chip Formation Mechanisms of Nano-Composite Ceramics in Two-Dimensional Ultrasonic Grinding
            Jing Lin Tong, Bo Zhao, Yan Yan Yan . . .614
  • Research on the Surface/Subsurface Damages of ZTA Ceramics under Two-Dimensional Ultrasonic Vibration Assisted Grinding
            Yan Yan Yan, Bo Zhao, Jun Li Liu . . .619

  • rev. 5/7/12
    © Abrasive Engineering Society 2012