HAND DEBURRING: Increasing Shop Productivity

TABLE OF CONTENTS
  • Overview of Deburring and Hand Deburring ..........1
  • Whatís Right about Hand Deburring..........9
  • Edge Requirement and Standards..........25
  • Common Hand Deburring Practices..........43
  • Deburring Costs -- A Primer..........71
  • Manual Deburring --The Real Costs..........81
  • Deburring with Knives ..........91
  • Deburring with Scrapers ..........109
  • Countersinks and Chamfering Tools ..........115
  • Rotary Burrs..........125
  • Reamers as Deburring Tools..........157
  • Files..........161
  • Mounted Points (abrasives)..........177
  • Hand Stones ..........187
  • Abrasive Wood Tools..........197
  • Abrasive Cork Tools..........201
  • Abrasive Cotton-Fiber Products..........205
  • Abrasive Rubber Tools..........211
  • Bonded Abrasives Tools (coated abrasives)..........221
  • Brusher..........239
  • Ballizing..........271
  • Miscellaneous Special Hand Tools.......... 275
  • Handheld Motors..........283
  • Bench and Pedestal Motors..........299
  • Hand-operated Mechanized Machines..........305
  • Support Items..........313
  • Tools that Beat Down Edges..........333
  • Hot Wire Tools for Thermoplastic Parts..........335
  • Mecahnization and Automation..........341

  • Environmental, Health, and Safety Issues..........351
  • Ergonomics..........357
  • Getting More out Your Operation..........371
  • Training for Manual Deburring..........423
  • Inspecting for Burrs and Sharp Edges..........435
  • Index..........463
  • Hand Deburring
    by LaRoux Gillespie
    ISBN: 0-87263-642-9
    468 pages, illus., graphs, charts,
    SME 2003
    $118 plus shipping costs
    Use our line form
    " to ask a question or order this book.
    Hand Deburring
    NEW...Hand Deburring is a treasure trove of information on deburring tools and practices. The book not only compliments the Deburring and Edge Finishing Handbook, Gillespieís previous book, but offers insights into the many technical and human issues that encompass deburring technology. Though the prevailing manufacturing culture sees automation as the solution to deburring problems and researchers conclude that the future lies in learning to avoid creating burrs, attention to hand deburring is important. In a worldwide survey described in chapter 5, hand processes out number other methods by a factor of 20 to 1.
    Opening sections of the book provide a background on deburring technology and a context in which hand methods function. Chapter 2 addresses the question of whatís right about hand deburring showing why hand methods will continue to be an essential part of manufacturing. Chapters 3 includes a glossary, sections of recent standards developed by the Worldwide Burr Technology Committee and a discussion on the tie to edge finishing-- factors that illustrate evolution of deburring into a engineering discipline. A chapter on cost calculations provides a critical review of cost evaluation methods and a look at four aspects of determining the real costs. An established rule of thumb estimates costs at 3% of machinist time, but current research places the factor closer to 10%. A chapter on common practices is a collection of observations of both good and bad practices in industry as well as an overview of common procedures to select tools and remove burrs from threads and other common machined surfaces. Noteworthy are discussions on social and management issues that affect quality and performance of deburring operations.
    Center portions of the book cover deburring tools, which are divided equally between metal tools (files, burs, scrapers, etc.) and abrasives (mounted points, coated abrasives ,etc.). In covering the wide variety of tools, the book offers brief, encyclopedic data for less common products and separate detailed chapters for popular items as shown in the table of contents. The inclusion of unusual tools such as wood abrasive tools shows the effort to make the book comprehensive. Line drawings and recent photos of products from vendors are useful aids in exploring the variety of available tools Typical structure of a product chapter incorporates description and classification, usage, and references to technical literature. For the most popular tools, subsections on how to select a product and troubleshoot an application are added. Comparison of different methods is easy with the many tables and charts scattered throughout the book.
    Environmental, health, and safety issues are covered in a separate chapter as well as in specific detail for selected products in their respective chapters. A discussion of human factors such as carpal tunnel syndrome appears in a chapter on ergonomics. In the chapter headed Getting the Most from Your Operations Gillespie offers advice on human and technical management issues that could reduce costs and improve productivity of deburring operations. Rounding out the coverage, closing sections discuss training, and inspection tools.
    Itís not an exaggeration to describe La Roux Gillespie as a crusader who has dedicated 37 years of work to burr technology. As director of Deburring Technology International, he has been a leader in conducting national and international conferences on deburring, setting standards for burr technology and encouraging dialog among people in manufacturing on the many facets of the subject. In preparing this book he reports reviewing 4,500 technical articles, a clear example of his tireless work to compile information from diverse resources. Without question this book should be a standard resource for everyone concerned with deburring technology.
    Prices are subject to change over time. Credit card payment preferred. Call 724-282-6210 of fax 724-234-2376 with card information.

    RETURN

    © 2012 AES
    Rev 10/23/12